---
id: document_item.filters
page_type: documentation_article
title: "“Filters → Volume” Tab"
description: "Volume-filter parameters for Moonbot strategies, including 24-hour and hourly volume limits, fast hourly volume, minute-volume delta and BuyVolume/SellVolume ratio checks."
section: documentation
category: "Strategies / General Parameters for All Strategies / “Filters” Tab"
url: https://moonbot.pro/documentation/filters-tab/filters-volume-tab?format=md
locale: en
alternate_ru: https://moonbot.pro/ru/documentation/filters-tab/filters-volume-tab?format=md
alternate_zh: https://moonbot.pro/zh/documentation/filters-tab/filters-volume-tab?format=md
parent: https://moonbot.pro/documentation/filters-tab?format=md
previous: https://moonbot.pro/documentation/filters-tab/filters-ping-tab?format=md
next: https://moonbot.pro/documentation/filters-tab/filters-delta-tab?format=md
status: published
updated_at: 2026-11-11T00:25:22+03:00
---

# “Filters → Volume” Tab

- **IgnoreVolume**: **YES/NO** checkbox. \
  If **YES**, all parameters on the **Filters → Volume** tab are ignored — the entire filter section is skipped to reduce CPU load. A gray bar on the left side of the tab indicates that this tab is ignored. \
  If **NO**, all parameters on this tab are checked normally, and a green bar on the left indicates that the tab is active.Important: If the global filter-ignore mode **IgnoreFilters = YES** is enabled on the main **Filters** tab, then **Filters → Volume** will be ignored regardless of the value of **IgnoreVolume** (**YES** or **NO**). A gray bar will appear to the left of the tab indicating that this tab is ignored.\
  ⚠️ **Important!** If the global filter-ignore mode **IgnoreFilters = YES** is enabled on the main **Filters** tab, then **Filters → Volume** will be ignored regardless of the value of **IgnoreVolume (YES** or **NO)**. A gray bar will appear to the left of the tab indicating that this tab is ignored.
- **MinVolume**: a field for specifying the minimum 24-hour trading volume for a coin. If the volume is below this value, the strategy will not operate on that coin. This is a positive value specified in BTC, ETH, BNB, USDT, PAX, TUSD, USDC, depending on the trading pair selected in the terminal. The 24-hour volume is updated every 5–10 minutes. You can view it in the **Coins Table** in the **Vol**. column or in the dv value on the right-hand panel of the coin’s chart;
- **MaxVolume**: a field for specifying the maximum 24-hour trading volume for a coin. If the volume is above this value, the strategy will not operate on that coin. Same units and update interval as **MinVolume** (BTC, ETH, BNB, USDT, PAX, TUSD, USDC). Displayed in the **Vol.** column or **dv** panel on the chart;
- **MinHourlyVolume**: a field for specifying the minimum hourly trading volume for the coin. If the volume is below this value, the strategy will not operate. Units are the same as above. Displayed in the **H.vol**. column or the **hv** value in the chart’s right-hand panel;
- **MaxHourlyVolume**: a field for specifying the maximum hourly trading volume. If the volume is above this value, the strategy will not operate. Displayed in **H.vol.** or **hv**;
- **MinHourlyVolFast**: a field for specifying the minimum fast-updated hourly volume (updated by trades). If below this value, the strategy will not operate. If set to 0, it is ignored. This volume is shown on the chart in the upper-left corner as **Vf**;
- **MaxHourlyVolFast**: a field for specifying the maximum fast-updated hourly volume. If above this value, the strategy will not operate. If set to 0, it is ignored. Displayed on the chart as **Vf**;
- **MinuteVolDeltaMin**: a field for specifying the minimum minute volume delta, below which the strategy will not operate. If set to 0, it is ignored.\
  The volume delta is calculated as: \
  (volume of last 1 minute) ÷ (average 1-minute volume over the last 3 hours). A value of 1 means the current volume equals the average. Displayed on the chart as **Vd**;
- **MinuteVolDeltaMax**: a field for specifying the maximum minute volume delta, above which the strategy will not operate. If set to 0, it is ignored. Calculated and displayed the same way as **MinuteVolDeltaMin** (value **Vd**);
- **UseBV_SV_Filter**: **YES/NO** checkbox. \
  If **YES**, enables the filter comparing **BuyVolume** (**BV**) to **SellVolume** (**SV**). The strategy triggers only if the calculated **BV_SV** ratio lies between the values defined by: **BV_SV_FilterRatio → BV_SV_FilterRatioMax**. This filter is applied only if **AutoBuy=YES**;
- **BV_SV_FilterRatio**: a field for specifying the minimum **BV/SV** ratio, below which the strategy will not operate. If set to 0, it is ignored. Used only when **AutoBuy=YES**.\
  The calculation method is defined by **BV_SV_Kind** (Time or **TradesCount**) and the period **N** is defined in **BV_SV_TradesN** (on the **Stops** tab).\
  For example: \
  On the **Filters → Volume** tab: UseBV_SV_Filter = YES and BV_SV_FilterRatio = 1\
  On the **Stops** tab: BV_SV_Kind = Time and BV_SV_TradesN = 60 \
  then the **BV_SV** filter is enabled and will monitor that the **BV/SV** ratio on the coin is 1 or higher, with the **BV_SV** calculation performed over the last 60 seconds. If these conditions are met, the strategy will be able to place an order, provided it also passes its other filters:
- **BV_SV_FilterRatioMax**: a field for specifying the maximum value of the ratio between buy volume **BV** (**BuyVolume**) and sell volume **SV** (**SellVolume**) over either the last **N** units of time or the last **N** trades, above which the strategy will not operate. If set to 0, the parameter is not applied. This parameter is taken into account only when auto-buy is enabled in the strategy (**AutoBuy = YES**).\
  The calculation method: by a specific amount of time (**Time**) or by a specific number of trades (**TradesCount**) — is defined in the **BV_SV_Kind** parameter, while the value of **N** is set in the **BV_SV_TradesN** parameter on the **Stops** tab of the strategy settings.\
  For example:\
  On the **Filters → Volume** tab: UseBV_SV_Filter = YES BV_SV_FilterRatioMax = 5\
  On the **Stops** tab: BV_SV_Kind = TradesCount BV_SV_TradesN = 100 \
  then the **BV_SV** filter is enabled and will monitor that the **BV/SV** ratio on the coin is 5 or less, while the **BV_SV** calculation will be performed over the last 100 trades. If these conditions are met, the strategy will be able to place an order, provided all its other filters are also satisfied.

.

## Navigation

Path: [Main](https://moonbot.pro/?format=md) / [Documentation](https://moonbot.pro/documentation?format=md) / [Strategies](https://moonbot.pro/documentation/strategies?format=md) / [General Parameters for All Strategies](https://moonbot.pro/documentation/general-parameters-for-all-strategies?format=md) / [“Filters” Tab](https://moonbot.pro/documentation/filters-tab?format=md) / “Filters → Volume” Tab

Parent section: [“Filters” Tab](https://moonbot.pro/documentation/filters-tab?format=md)

Previous: [“Filters → Ping” Tab](https://moonbot.pro/documentation/filters-tab/filters-ping-tab?format=md)

Next: [“Filters → Delta” Tab](https://moonbot.pro/documentation/filters-tab/filters-delta-tab?format=md)

## Related

- [“Filters → Delta” Tab](https://moonbot.pro/documentation/filters-tab/filters-delta-tab?format=md)
