---
id: document_item.filters-price-position
page_type: documentation_article
title: "“Filters → Price/Position” Tab"
description: "Price and position filter settings for Moonbot strategies, including the IgnorePrice switch that disables this filter section when its market-condition checks are not required."
section: documentation
category: "Strategies / General Parameters for All Strategies / “Filters” Tab"
url: https://moonbot.pro/documentation/filters-tab/filters-price-position?format=md
locale: en
alternate_ru: https://moonbot.pro/ru/documentation/filters-tab/filters-price-position?format=md
alternate_zh: https://moonbot.pro/zh/documentation/filters-tab/filters-price-position?format=md
parent: https://moonbot.pro/documentation/filters-tab?format=md
previous: https://moonbot.pro/documentation/filters-tab/filters-time-tab?format=md
next: https://moonbot.pro/documentation/filters-tab/filters-ping-tab?format=md
status: published
updated_at: 2026-11-11T00:22:22+03:00
---

# “Filters → Price/Position” Tab

- **IgnorePrice**: **YES/NO** checkbox. \
  If **YES**, all parameters on the **Filters → Price/Position** tab are ignored — meaning this entire filter section is not checked, which reduces CPU load. A gray bar to the left of the tab indicates that it is ignored. \
  If **NO**, the filters on this tab are checked normally, and a green bar appears to the left of the tab indicating that this tab is active.\
  ⚠️ **Important**: If the global filter-ignore mode **IgnoreFilters = YES** is enabled on the main **Filters** tab, then **Filters → Price/Position** will be ignored regardless of the value of **IgnorePrice** (**YES** or **NO**). A gray bar will appear to the left of the tab indicating that it is ignored.
- **MaxBalance**: a field for specifying the maximum balance value used by all strategies (including **OrderSize** of this strategy). If exceeded, this strategy is not allowed to place Buy orders. If set to 0, the parameter is ignored.
- **SamePosition**: **YES/NO** checkbox. \
  If **YES**, do not open new orders in the direction opposite to an already open position. This parameter is used only in the following futures strategies: MoonShot, MoonHook, Telegram.
- **MaxPosition**: a field for specifying the maximum position threshold. If the position exceeds this threshold, all Buy orders will be canceled (when **CheckAfterBuy** is enabled), and new Buy orders will not be placed.
- **SessionProfitMin**: a field for specifying the minimum session profit threshold in USD. If the session profit is below this value, the strategy cannot place Buy orders. Session auto-reset timing is configured in **Settings → Autostart.** If set to 0, the parameter is ignored.
- **SessionProfitMax**: a field for specifying the maximum session profit threshold in USD. If the session profit is above this value, the strategy cannot place Buy orders. Session auto-reset timing is configured in **Settings → Autostart**. If set to 0, the parameter is ignored.\
  Examples:\
  SessionProfitMin = -100, SessionProfitMax = 0 The strategy may place Buy orders as long as the session result for the coin remains between –100 USD and +∞, because SessionProfitMax = 0 is ignored.\
  SessionProfitMin = -100, SessionProfitMax = 100 The strategy may place Buy orders while the session result stays between –100 USD and +100 USD.\
  SessionProfitMin = 0, SessionProfitMax = 100 The strategy may place Buy orders as long as the session result stays between –∞ (because SessionProfitMin = 0 is ignored) and +100 USD.
- **TotalLoss**: a field for specifying the total loss threshold. If total loss exceeds this value, the strategy stops operating. The loss value is specified as a positive number and is calculated according to Autostart settings for the selected time period.
- **WorkingPriceMax**: a field for specifying the maximum price boundary. If the coin price rises above this boundary, the strategy stops working. If 0, the parameter is ignored.
- **WorkingPriceMin**: a field for specifying the minimum price boundary. If the coin price falls below this boundary, the strategy stops working. If 0, the parameter is ignored.
- **PriceStepMin**: a field for specifying the minimum price step (in %) from the current price. Current values for each coin can be found in the **PumpQ** column of the **Coins Table** (the second number after the “/”).
- **PriceStepMax**: a field for specifying the maximum price step (in %) from the current price. Current values for each coin can be found in the PumpQ column of the Coins Table (the second number after the “/”).\
  Example: If a coin costs 20 satoshi, the price step is 5%. If a coin costs 200 satoshi, the price step is 0.5%. (The default PriceStepMax value prevents buying coins priced below 200 satoshi.)
- **UseBTCPriceStep**: **YES/NO** checkbox. \
  If **YES**, the price step filter uses the BTC market step; If **NO**, it uses the actual market step.\
  Example: USDT–HOT has an actual price step of 0.02%, while BTC–HOT has 14%. Using this parameter, HOT can be excluded using a step filter between 0% and 1%.

## Navigation

Path: [Main](https://moonbot.pro/?format=md) / [Documentation](https://moonbot.pro/documentation?format=md) / [Strategies](https://moonbot.pro/documentation/strategies?format=md) / [General Parameters for All Strategies](https://moonbot.pro/documentation/general-parameters-for-all-strategies?format=md) / [“Filters” Tab](https://moonbot.pro/documentation/filters-tab?format=md) / “Filters → Price/Position” Tab

Parent section: [“Filters” Tab](https://moonbot.pro/documentation/filters-tab?format=md)

Previous: [“Filters → Time” Tab](https://moonbot.pro/documentation/filters-tab/filters-time-tab?format=md)

Next: [“Filters → Ping” Tab](https://moonbot.pro/documentation/filters-tab/filters-ping-tab?format=md)

## Related

- [“Filters → Ping” Tab](https://moonbot.pro/documentation/filters-tab/filters-ping-tab?format=md)
- [“Filters → Volume” Tab](https://moonbot.pro/documentation/filters-tab/filters-volume-tab?format=md)
- [“Filters → Delta” Tab](https://moonbot.pro/documentation/filters-tab/filters-delta-tab?format=md)
